A loud bang from the garage, then an opener that hums or strains but cannot lift the door, almost always means a broken spring. It is the most common garage door repair there is, and it is not a do-it-yourself job. Torsion springs hold enough energy to cause serious injury. Leave the door down and call (816) 680-5063 or use the free estimate form for a free estimate from a local garage door pro who works in Clay and Platte counties.

We take spring repair requests in Liberty, Gladstone, North Kansas City, Kearney, Smithville, Parkville, Platte City, and Excelsior Springs.
Signs of a broken or worn spring
- A loud bang from the garage, often when no one was using the door.
- A visible gap in the coil of the spring on the bar above the door.
- The opener runs but the door barely lifts, lifts a few inches and stops, or reverses.
- The door feels extremely heavy when you try to lift it by hand.
- The door goes up crooked or one cable is slack.
- On older doors, a stretched or snapped spring along the side of the track.
Torsion vs. extension springs
Torsion springs sit on a steel bar above the door opening. Most homes built in the last few decades in Kearney, Smithville, Platte City, and the newer parts of Liberty have them. Wide or insulated doors often have two.
Extension springs run along the horizontal tracks on each side and stretch when the door closes. They are common on older Northland homes, especially the 1950s–1970s ranches in Gladstone, North Kansas City, and Excelsior Springs. They should always have a safety cable running through them so a snapped spring cannot fly across the garage. Many pros recommend converting old extension systems to torsion springs when they fail.

What a proper spring repair includes
- Matching the spring to the door. Springs are sized by wire diameter, inside diameter, and length to fit the weight of the door. The wrong spring makes a door that drifts down or flies up.
- Replacing both springs on a two-spring door. They wear at the same rate.
- Checking the cables, drums, bearings, and rollers. Springs and cables wear together, and a frayed cable is the next thing to fail.
- Balancing the door. A correctly balanced door stays put when lifted halfway by hand.
- Testing the opener’s force settings and safety sensors after the door is balanced.
- Offering high-cycle springs. Springs rated for 25,000 to 50,000 cycles cost more upfront but can last much longer.
Ask for the price of every part before work starts. A common complaint about the garage door trade is a low phone quote for a spring that turns into a much bigger bill once extra parts are added. A good pro explains what else is worn and lets you decide.
What spring repair costs in Kansas City
LocalGoingRate’s Kansas City guide (verified November 2026) lists about $200–$505 to replace both torsion springs on one door, with $305 typical, $140–$305 for a single torsion spring, and $120–$355 for a pair of extension springs. Converting extension springs to a torsion system runs about $405–$835.
State Line Door & Lift’s 2026 Kansas City pricing lists $200–$400 for a standard torsion pair, $150–$300 for extension springs, and $350–$550 for high-cycle torsion springs.
Night, weekend, and holiday calls often add $100–$305, per LocalGoingRate.
Why springs break more in winter
Spring steel fatigues with every cycle. Cold mornings add stress: hardware is stiffer, lubricant thickens, and a door frozen to the slab can jerk free. Many Northland techs see a jump in broken-spring calls during January and February cold snaps. Keeping the springs lightly lubricated and the bottom seal free of ice helps.

What to send with your request
Your city, the door size, whether you have one or two springs above the door (a photo helps), and whether a car is stuck inside. Call (816) 680-5063 or request a free estimate.
FAQs
Can I replace the spring myself? The door makers’ trade group recommends that spring systems be repaired only by trained technicians. Winding bars and torsion springs cause real injuries.
How long does it take? Usually 45 minutes to two hours for a standard door.
Can I use the door until the tech arrives? No. Leave it closed. If your car is stuck inside, say so when you call.
How long will new springs last? Standard springs are rated for roughly 10,000 to 20,000 cycles. High-cycle springs last longer.
Garage door services are provided by independent local professionals. Price ranges are general estimates, not quotes.
Call (816) 680-5063 or request a free estimate.